Samaya Basecamp Footprint
Under alpine ekspedisjoner er statistisk sett 50 til 60% av basecamper satt opp på morenegrunn og ikke på snø. Den eksterne bunnduken til BASECAMP er designet for å bevare teltets bunnduk og med det forlenge dets levetid uansett under hvilke forhold det blir brukt.
Vekt: 830 g
Pakkvekt: 850 g
Pakkevolum: 0,9 L
Vannsøyle: 10000 mm
Nylon 70D PU/Silicon 10000 mm
Floor waterproofness: 10 000 mm
Minimum weight: 830 g
Packed weight: 850 g
Floor dimensions: 4,500 mm x 2,700 mm
Surface area : 8.9 m²
Packed size: 150 mm x 210 mm x 30 mm
Packed volume: 0.9 L
Floor fabric: Nylon 70D PU/Silicon 10 000 mm
On high mountain expeditions, 50 to 60% of the base camps are set up on rocky terrain, more commonly known as moraines, and not on snow. The Samaya BASECAMP's floor mat is designed to preserve the ground of your tent and thus increase its lifespan whatever the conditions encountered. In the same format as your tent, you choose to put the BASECAMP Footprint only under your room or also under your apse.
The Samaya BASECAMP floor mat is designed to protect the floor of your tent when the base camps are not on snow.
In the high mountains and during your expeditions, 50 to 60% of the base camps are mounted on moraines (piles of boulders and rocky debris). Intended to remain in the same place for sometimes several months, your tent could suffer undesired damage on the ground due to repeated rubbing on one and the same surface. This would probably cause water to infiltrate and cause you to lose insulation.
Anticipate and don't let any detail disturb your expedition and deprive you of a not insignificant comfort.
This footprint will also allow you to increase the spectrum of use of your Samaya BASECAMP. Developed for polar and Himalayan expeditions, this tent will also be perfect to enjoy a family bivouac on any type of terrain and at any altitude. Equip your Samaya BASECAMP with the floor mat to extend its use!
Each side of the floor mat has a specific coating. The part in direct contact with the floor is siliconized to increase abrasion resistance. The surface in contact with the tent is covered with a PU coating which, thanks to its sticky aspect, prevents the two fabrics from slipping on each other.